PWS4602可编程直流电源

主要特点和优点

主要性能指标

• 线性稳压电源

提供的功能和特点

• 在明亮的显示器上同时显示输出电压、电流和极限

连接

• 后面输出和触发/ 状态线路

宽电流和电压范围及灵活的功能使得PWS4000 系列电源成为 多功能工作台仪器。由于0.03% 基本电压精度和0.05% 基本 电流精度，您可以对电源输出值树立信心。远程传感功能消除 了引线中电压下跌造成的影响，p-p的噪声进一步保证了 准确的功率测量结果。列表模式和远程编程使用的USB端口加 快了复杂测试的开发速度。PWS4000 系列电源迅速准确地为 您的应用提供了所需的处理能力。

全面控制输出

PWS4000 系列所有型号都有一个过压保护电路，在输出电压 因任何原因超过用户门，会降低输出电压。PWS4000 系列还包括一种设置，允许防止电压因意外调节超出极 限。

设置相应电流极限对防止被测设备损坏至关重要。通过 PWS4000 数字键盘，您可以在开始测试前，迅速准确地 电流极限。显示屏上一直可以看到电流极限，让您知道这种重 要设置。用户自定义口令可以锁住前面板，防止在关键测试过 程中发生不想要的调节。

专业设计，让您的工作更轻松

PWS4000 系列电源采用专门设计，使用简便，提供了您预期 泰克提供的熟悉操作。

直观操作

旋转旋钮及用户可选择步长，可以简便地检查电路对电压或电 流变化的响应。直接输入数字键盘简化了设置精确电压和电流 值的工作。

明亮的显示器

明亮的真空荧光显示器在远处、在斜角、或在光线暗时都能看 清屏幕上的内容。用户一直可以看清仪表读数和极限，您不需 要按按钮，就可以看到极限值。

设置存储器

为在重复测试时节约时间，您只需按Save 按钮，就可以把仪 器设置保存在40 个内存位置的其中一个位置上。每次在您想 调用设置时，您只需按Recall按钮，选择所需的设置就可以了。

加快复杂的测试开发速度

内置列表模式允许为测试自定义的电压和电流步长顺序。 可以定义最多7个列表，每个列表可以有最多80个步长。列表 可以配置成在外部触发或按前面板按钮时逐步通过顺序。也可 以每个步长的时长，仪器将自动逐步通过顺序。如需提高 灵活性，可以使用后面板上的USB设备端口，简便地把电源连 接到PC 上，实现远程编程。

连通工作台，实现智能调试

您可以使用的编程环境，通过USBTMC 标准设备端口控 制PWS4000，还可以使用专用的泰克版National Instrument LabVIEW SignalExpressTM软件，迅速获得结果。每台 PWS4000系列电源都标配免费的限定版SignalExpress软件， 提供了基本仪器控制、数据记录和分析功能。选配的专业版软 件提供了200种内置功能，提供了更多的信号处理、高级分析、 扫描、极限测试和用户自定义步骤功能。

Main features and advantages

Key performance indicators

Linear regulated power supply

Up to 72 V output voltage

Accuracy of basic voltage

Accuracy of basic current

P-p ripple and noise

Functions and features provided

The output voltage, current and limit are displayed on a bright display

Overvoltage protection can be adjusted

Input parameters directly through the numeric keypad

Up to 40 user-defined Settings are stored

List mode, step through the stored Settings, execute the test sequence

Remote sensing, compensating lead resistance

The connection

Later output and trigger/state lines

A USB device port is provided on the back panel for quick PC connection and remote programming

Including National Instrument LabVIEW SignalExpressTM TE limited edition software, connectivity test platform

Wide current and voltage ranges and flexible features make the PWS4000 series power supply a versatile bench instrument. You can build confidence in the power supply output due to the 0.03% basic voltage accuracy and 0.05% basic current accuracy. The remote sensing function eliminates the impact of voltage drop in the lead, and the p-p noise further ensures accurate power measurement results. The list mode and the USB port used for remote programming speed up the development of complex tests. The PWS4000 series power supply quickly and accurately provides your application with the processing power it needs.

Total control output

All models of the PWS4000 series have an overvoltage protection circuit that reduces the output voltage when the output voltage exceeds the user-specified threshold for any reason. The PWS4000 series also includes a setting that allows accidental voltage regulation to be prevented from exceeding a specified limit.

It is very important to set the corresponding current limit to prevent the damage of the equipment under test. With the PWS4000 numeric keypad, you can quickly and accurately specify the current limit before starting the test. The current limit can always be seen on the display screen, letting you know this important setting. User-defined passwords lock the front panel to prevent unwanted adjustments during critical test runs.

Professional design, make your work easier

The PWS4000 series power supply is specially designed and easy to use, providing the familiar operation you expect from tektronix.

Intuitive operation

By rotating the knob and selecting the step size, the response of the circuit to voltage or current changes can be easily checked. The direct input numeric keypad simplifies setting precise voltage and current values.

Bright display

Bright vacuum fluorescence displays can see clearly at a distance, at a bevel Angle, or in low light. The user can always see the meter reading and limit, you do not need to press the button, you can see the limit value.

Setup memory

To Save time during repeated tests, simply press the Save button to Save the meter Settings in one of the 40 memory locations. Each time you want to call the Settings, you just press the Recall button to select the Settings you need.

Speed up complex test development

The built-in list mode allows you to specify a custom order of voltage and current steps for your tests. You can define up to seven lists, each with up to 80 steps. Lists can be configured to step through the sequence when triggered externally or when the front panel button is pressed. The length of each step can also be specified, and the instrument will automatically step through the sequence. To increase flexibility, you can use the USB device port on the back panel to simply connect the power supply to a PC for remote programming.

Connect the workbench to realize intelligent debugging

You can use the preferred programming environment to control PWS4000 through the standard device port of USBTMC, and you can also use the special National Instrument version LabVIEW SignalExpressTM software to quickly get the results. Each PWS4000 series power supply is standard with free SignalExpress software, which provides basic instrument control, data recording and analysis functions. The optional pro software comes with 200 built-in features for more signal processing, advanced analysis, scanning, limit testing, and user-defined steps.